Form deck is used extensively in floor construction as an economical form to support concrete slabs during construction. All of our deck products meet required steel deck certifications in accordance with the specifications of the Steel Deck Institute.
Form deck is available in lengths from 6′-0″ to 40′-0″. Please check with your local New Millennium facility for lengths outside these parameters. Conforms to ASTM A1008/A1008M for uncoated and painted deck, A653/A653M for galvanized deck. Approved by UL, LLC and listed in the UL and ULC Fire Resistance Directories.
Yield strength up to 80ksi. Refer to published tables for the minimum yield strength used for each deck type, contact New Millennium for availability of higher yield strengths when required, or use our deck specification tool to view load tables with commonly available non-standard yield strengths and/or gages.
Type 0.6FD form deck is used extensively in floor construction as an economical form to support concrete slabs during construction. Specifying 0.6FD deck may eliminate the need for expensive temporary shoring. Floor systems using 0.6FD deck are some of the most economical floors available.
S-Dek is a 9/16″ deep, permanent form deck system for reinforced concrete (145pcf normal weight) slabs. The deck system can also be used as a roof or lightweight insulating concrete roof deck system.
HD-Dek is a 15/16″ deep, permanent form deck system for reinforced concrete (145pcf normal weight) slabs. The deck system can also be used as a roof or lightweight insulating concrete roof deck system.
Type 1.0FD form deck is used extensively in floor construction as an economical form to support concrete slabs during construction. Specifying 1.0FD deck may eliminate the need for expensive temporary shoring. Floor systems using 1.0FD deck are some of the most economical floors available.
HD-Dek is a 1 5/16″ deep, permanent form deck system for reinforced concrete (145pcf normal weight) slabs. The deck system can also be used as a roof or lightweight insulating concrete roof deck system.
Type 1.5FD form deck is used extensively in floor construction as an economical form to support concrete slabs during construction. Specifying 1.5FD deck may eliminate the need for expensive temporary shoring. Floor systems using 1.5FD deck enable the designer to space the structural members to over 10′-0″ on center.
Type 1.5FDR form deck is also used in floor construction as an economical form to support concrete slabs during construction. Specifying 1.5FDR deck may eliminate the need for expensive temporary shoring. Floor systems using 1.5FDR deck enable the designer to space the structural members to over 10′-0″ on center.
SD-Dek is a 1 1/2″ deep, permanent form deck system for reinforced concrete (145pcf normal weight) slabs. The deck system can also be used as a roof or lightweight insulating concrete roof deck system.
SD-Dek Inverted is a 1 1/2″ deep, permanent form deck system for reinforced concrete (145pcf normal weight) slabs. The deck system can also be used as a roof or lightweight insulating concrete roof deck system.
Type 2.0FD form deck is used in floor construction as an economical form to support concrete slabs during construction. Floor systems using 2.0FD deck enables the designer to space the structural members to over 14′-0″ on center without any additional shoring.
Type 3.0FD form deck is used in floor construction as an economical form to support concrete slabs during construction. Floor systems using 3.0FD deck enables the designer to space the structural members to over 16′-0″ on center without any additional shoring.
